Isolation RS232/485/422Converter and Repeater
Model：SW485GIIntroduction:SW485GI Can use for RS485/422 repeater and RS232 to RS485/422 converter, but just use one function at same time. The product must have 12-36VDC power input, optic- electrical isolation more than 3KV. Have small volume, 3000m transfer distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is a best performance and price interface converter and Repeater.
- 1. Support DIN-rail, Terminal block connection
- 2. 12～36VDC Power input(3 bit terminal block)
- 3. Adopt itself adapt interface technique, no use for setup switch
- 4. Adopt ADDC, auto distinguish and data transfer direction.
- 5. Can use for RS485/422 repeater and RS232 to RS485/422 converter, but just use one function at same time
- 6. Supply 3000V optic-electrical isolation, 1500W surge protection
- 7. Reach up to 3000m at the rate of 9600bps
- Standards: EIA RS-232C, RS-485, RS422 standard
- RS-232 signal: TX, RX, GND
- RS-422 signal: T+, T-, R+, R-, GND
- RS-485 signal: D+, D-, GND
- Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
- Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
- Flow control: Data direction auto-turnaround, no flow control is required
- Transfer distance: RS-485/422 side:3Km(9600bps)
- RS-232 side: no less than 5m
- Max number of drops: 128 nodes
- Optical isolation: 3000V
- Port protect: 1500W surge protection,15KV ESD protection
- Connector: RS-232 side DB9 female
- RS-485/422 side 5 bit terminal block
- Isolation mode, adopt +12V~36VDC input power, provide 3000V isolation
- Environment
- Operating temperature: -40°C to 85°C
- Storage temperature: -40°C to 85°C
- Humidity: 5% to 95%(no condensation)
- Appearance
- Dimensions: 100.0mm×69.0mm×22.0mm
- Material: Iron(shell)
- Color: White
- Weight: 200g
- Warranty: 5 years
- Approvals: FCC, CE, RoHS approvals
